The energy absorption in ballistic tests of alumina-ultra high molecular weight polyethylene (UHMWPE) composites with 60, 80 and 90 wt% alumina submitted to gamma radiation doses of 25, 50 and 75 kGy was investigated. The ballistic tests were carried out at subsonic speed using a compressed air system. The results showed that the composite with 80% alumina irradiated with 50 kGy yields the best ballistic results. Gel content, Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results showed that this composite is the one with the highest concentration of crosslinks and the lowest volume fraction of amorphous UHMWPE. Scanning electron microscopy (SEM) images of the same composite showed a high pullout, suggesting that gamma irradiation increases the adhesion between alumina and UHMWPE.

The response to ballistic impact of alumina-ultra high molecular weight polyethylene (UHMWPE) composites with different relative concentrations of alumina was investigated. The impact tests were carried out at subsonic speed using a compressed air system. The results showed that the depth of penetration (DOP) in a Medium Density Fiberboard (MDF) bulkhead protected by a disk of the composite decreased with increasing concentration of alumina in the composite. Scanning electron microscopy (SEM) images of composites with 80 %, 85 % and 95 % alumina showed transgranular, intergranular and ductile fracture mechanisms.

Natural fiber reinforced polymer composites have recently been investigated as a component of multilayered armor system (MAS). These composites were found to present advantages when replacing conventional high strength synthetic aramid fabric laminate composite (KevlarTM, with same thickness, as MAS second layer. Continuous and loose natural fibers were up to now mostly used to reinforce these ballistic composites. Only two natural fabrics reinforced polymer composite were so far used with same purpose. Therefore, this work investigated the possibility of substituting KevlarTM for three other natural fabrics, based on mallow and jute fibers, as reinforcement of epoxy composites. Fabrics made of either pure mallow, or 70%mallow/30% jute or 50%mallow/50% jute fibers were separately mixed with epoxy to produce laminate composite plates. These plates were set as second layer of Al2O3/Nb2O5 front ceramic MAS, that were ballistic tested against relatively high energy 7.62 mm ammunition. Indentation depth values caused by the bullet penetration in clay witness, simulating human body behind the MAS, were always found to be below the safety standard limit. These indentation values were similar to those obtained in MAS with KevlarTM as second layer. However, significant economical advantages favor the investigated natural fabric composites over the synthetic Kevlar.

In the present study, poly (ethylene terephthalate)-based composites were produced and characterized. These composites were composed by poly (ethylene terephthalate) (PET) reinforced with geopolymer concrete waste (GCW). Both untreated (U-GCW) and treated with oleic acid (OA) geopolymer concrete waste (T-GCW) were used in the production of the composites. The PET/GCW ratios used for either treated or untreated GCW bodies were 80/20 (wt%), 60/40 (wt%) and 50/50 (wt%). Chemical compositions were assessed by X-ray fluorescence spectroscopy (XRF), crystallinity by differential scanning calorimetry (DSC), thermal stability by thermogravimetry (TGA), microstructure by field emission gun scanning electron microscopy (FEG-SEM) with energy dispersive X-ray spectroscopy (EDS), and mechanical properties were assessed by compression tests. Fourier transform infrared spectroscopy (FT-IR) was used to check the efficiency of the treatment with OA, as well as the interaction between PET and GCW. The T-GCW PET composites showed better thermal, physical, and mechanical properties, for non-structural applications, when compared to U-GCW.

Multilayered armor systems (MAS) composed of relatively lighter materials with capacity to provide personal ballistic protection are being extensively investigated and used in armor vests. A typical MAS to stand high impact energy 7.62 mm bullet has a front ceramic followed by an aramid fabric laminate, such as Kevlar™. Since both the army and municipal police personnel might need to wear an armor vest, a large number of vests needs to be supplied. In the case of Kevlar™, one of the most expensive MAS material with an expiration time of 5 years, the possibility of its replacement by an equally ballistic efficient low cost material and more durable could be a relevant economical advantage. Natural fibers composites have recently been investigated as possible alternatives for Kevlar™. In particular, the fiber extracted from the coconut fruit, known as coir fiber, normally disposed as waste, could be a low cost material for this purpose. Therefore, the present work investigated the possibility of using coir fiber mantle, with different volume fraction, reinforcing epoxy composites as MAS second layer. It was found that 30 vol% of coir fiber composite displayed similar ballistic performance as compared to Kevlar™ with substantial economical advantage.